• Speed transfers up to 9 GB per minute.
  • Systems & files code mode supports Windows(FAT16/32/64, NTFS), Linux(ext2/ext3/ext4), Mac(HFS, HFS+, HFSX.)
  • Data Sanitization : Quick Erase, DoD erase, and Secure Erase.
  • Open-Platform design supports Multi-Interface HDD/SSD.
  • Real-Time PC Monitoring.
  • Log Report Management records all tasks details for better production management.
  • Cable –free connection for easier HDD insert & remove.


ITS series, a professional SAS/SATA HDD duplicator is specially designed for high-volume duplication. Equipped with U-Reach ‘s unique multi-tasking technology, the ITS series Hard Drive duplicator can simultaneously copy 15 HDD targets and with a high transfer speed up to 18 GB per minute. We guarantee the highest productivity without speed degradation even when the number of targets increases. The ITS series SAS/SATA Hard Drive duplicator provides four copy modes: quick copy, all partitions copy, percentage copy, and whole HDD copy, that can meet different duplication task requirements. NTFS, Linux (Ext2/Ext3/Ext4), FAT/FAT32, Mac (HFS, HFSX, HFS+) are supported formats with a quick copy. Quick copy mode copies data and skips blank area; this mode enhances copy speed.
In addition, the ITS series SAS/SATA Hard Drive duplicator is equipped with different levels of secure erase functions, Quick Erase, Full Erase, DoD 5220 Erase government standards and Secure Erase which can fulfill different levels of security for Hard drive wiping.
Impeccable efficiency
U-Reach SAS/SATA HDD duplicator is capable of copying at 18GB/min. on all HDDs simultaneously, without any speed degradation as number of targets increase. This duplicator is great for HDD/PC/NB manufacturers.
Whole HDD Copy
Whole HDD Copy supports all kinds of partition formats.
Systems & Data Copy
Systems & Data Copy mode can identify the HDD formats of Windows (FAT16/32/64, NTFS), Linux(ext2/ext3/ext4), Mac (HFS, HFS+, HFSX. It will only copy the data and system contained area, which enhances the copying time.
4 ways of Sanitization
The ITS series HDD duplicator offers 4 ways of erase.
1.Quick Erase:Erase HDD index table, and takes few seconds to complete
2.Full Erase:Erase the complete HDD
3.DoD Erase:Complies with the U.S. Department of Defense’s standard of erasing.
4.Secure erase:A National Institute of Standards and Technology 800-88 accept technique for properly purging hard drives. This method is supported by almost all modern SAS/SATA HDD.
Device Compatibility
Support GPT, MBR table format
Support Advanced format HDD, Up to 10TB above device
Supported OS: Linux, Unix, Windows, Macintosh, etc. are all supported.
Open Platform Design
Easier HDD Insertion & RemovalSwappable HDD Port Module: easy for replacement and maintenance
Cable-free connection on HDD: supports 1.8″/2.5″/3.5” SAS/SATA HDD and SSDVia Adaptor: 2.5″, 3.5” IDE HDD, mSATA SSD, micro SATA, eSATA, ZIF, iVDR interfaces are compatible
Real-Time PC Monitoring
It is absolutely perfect for MONITORING the work progress during operation. It shows all the information for EVERY PORT, which is a powerful tool for sorting out the lagging writing HDD and keeping the operation efficient. All the information you need will be shown on a PC screen.
1.It’s able to monitor duplication status from PC while duplicators are connected to it.
2.shows and records the brand name, model, S/N, duplication time, result of every HDD from all the ports, the info of both sources HDD and target HDD are recorded.
3.Slow R/W speed HDD detection: lagging HDD can be easily sorted, because user can see the duplication speed of every port by. “Event Log”
4.To select a period of time in order to export part of the log data. Just one click, the data will be exported into .txt file and saved on PC. The date of export is the file name. (e.g. 20130308.txt)
Log Report Management
Records operation time, each port’s process details, HDD’s model, capacity, S/N, result (pass, fail).
Real-Time recording and viewing Log Report via PC-Link
Log report .txt file can be generated via USB port and saved to USB device
It can save up to 130,000 entries on the log. One entry is recorded on the log for every HDD. (e.g. duplication from 1 HDD to 21 targets will be recorded to 21 entries of log)
Auto power control system
When the duplicator stops executing any function, the machine will automatically cut off the power of each port to protect the HDD from damage during removal from the duplicator. The power of each port will only be supplied when the operation is on.
Stand-alone operation
There are two modes of operation, stand-alone and PC-link operation. User can choose either mode to satisfy different needs. Stand-alone is excellent in simplifying operation and very user-friendly (operating on four buttons of duplicator would complete all the jobs)





  • Model:IT700G
  • Target:7
  • HDD Interface:SATA
  • Display:Monochrome LCD Display
  • Control Button:4 push buttons(▲, ▼, OK, ESC)
  • Compatible Interface:1.8″/2.5″/3.5” SATA HDD and SSD
  • Erase Modes:Quick Erase, Full Erase, DoD Erase,Secure Erase,
  • Duplication Modes:
    • Quick Copy (Systems & files)
    • All partition
    • Whole HDD
    • Percentage Copy
  • Support Format:
    • Systems & files: FAT,NTFS, Linux(ext2, ext3, ext4),GPT, Dynamic HDD
    • All partition/Whole HDD: All formats
  • Support Language:English, Japanese
  • Power Supply:12V, 9A
  • Humidity Operating:20%~80%
  • Humidity Storage:5%~95%
  • Temperature Operating:5℃~45℃
  • Temperature Storage:-20℃~85℃
  • Safety:CE, FCC, RoHS
  • Weight:19lbs
  • Dimension (in):21* 15.5* 11