|With up to 7.2 GB/m transferring bandwidth, it is the greatest for Professional HDD/PC/NB Manufacturer. Each SATA interface is independent, no matter how many targets you would like to duplicate, the speed stays the same and doesn’t decline. 7.2 GB per minute is far beyond PC-based HDD duplicators.
|Whole HDD Copy supports all kinds of partition formats.
This mode can identify the HDD formats of FAT16/32, exFAT, NTFS, Linux(Ext2/Ext3/Ext4), Mac(HFS, HFS+, HFSX. It will only copy the data and system contained area, which enhances the copying efficiency very much
1.Quick Erase:Takes few seconds to complete
|2.Full Erase: Erase the complete HDD
|3.DoD Erase: Complies with the U.S. Department of Defense’s standard of erasing.
4.Secure erase: A National Institute of Standards and Technology 800-88 accept technique for properly
purging hard drives. This method is supported by almost all modern SATA HDD.
|Support GPT, MBR table format
|Support Advanced format HDD, Up to 15TB above device
|Supported OS: Linux, Unix, Windows, Macintosh, etc. are all supported.
|Easier HDD Insertion & Removal
|Swappable HDD Port Module: easy for replacement
|Cable-free connection on HDD: supports 1.8″/2.5″/3.5” SATA HDD and SSD
|Via Adaptor: 2.5″, 3.5” IDE HDD, mSATA SSD,
micro SATA, eSATA, iVDR interfaces are compatible
|It is absolutely perfect for MONITORING the work progress during operation. It shows all the information for EVERY PORT, which is a powerful tool for sorting out the lagging writing HDD and keeping the operation in most efficient. All the information you need will be shown on screen of PC.
|1. It’s able to monitor duplication status from PC while duplicators are connected to it.
|shows and records the brand name, model, S/N, duplication time, result of every HDD from all the ports, the info of both sources HDD and target HDD are recorded.
|Slow R/W speed HDD detection: lagging HDD can be easily sorted, because user can see the duplication speed of every port by. “Event Log”
|To select a period of time in order to export part of the log data. Just one click, the data will be exported into .txt file and saved on PC. The date of export is the file name. (e.g. 20130308.txt)
|Records operation time, each port’s process details, including HDD’s model, capacity, S/N, result (pass, fail).
|Real-Time recording and viewing Log Report via PC-Link
|Log report .txt file can be generated via USB port and saved to USB device
|It can save up to 130,000 piece of log. One instruction onto one HDD is recorded as one piece of log. (e.g. duplication from 1 HDD to 21 targets will be recorded to 21 pieces of log)
|Any falsification can be detected to ensure report is genuine. You do not need to worry about Log Report is not genuine any more.
|When the hard drive duplicator stop executing any function, the machine will automatically cut off the power of each port to protect the HDD from damage during removal from the duplicator. The power of each port will only be supplied when the operation is on.
|There are two modes of operation, stand-alone and PC-link operation. User can choose either mode to satisfy different need. Stand-alone is excellent in simplifying operation and very user-friendly (operating on four buttons of duplicator would complete all the jobs)