|U-Reach SATA HDD duplicator is capable of copying at 18 GB/min on all HDDs simultaneously, without any speed degradation as the number of targets increase. This duplicator is great for manufacturers.
|Whole HDD Copy
|Whole HDD Copy supports all kinds of partition formats.
|Systems & Data Copy
|This mode can identify the HDD formats of Windows (FAT16/32/64, NTFS), Linux(ext2/ext3/ext4), Mac(HFS, HFS+, HFSX. It will only copy the data and system contained area, which enhances the copying time.
|Support 4 types of Erase Mode
|Erase HDD index table, and only takes A FEW SECONDS to complete
|Erase the whole HDD content
|Complies with the U.S. Department of Defense’s standard of erasing.
|A National Institute of Standards and Technology 800-88 accepted technique for properly purging hard drives. This method is supported by almost all modern SATA HDD.
|Support GPT, MBR table format
|Support Advanced format HDD, Up to 9TB device.
|Supported OS: Linux, Unix, Windows, Macintosh, etc.
|Open Platform Design
|Real-Time PC Monitoring
|It is absolutely perfect for MONITORING the work progress during operation. It shows all the information for EVERY PORT, which is a powerful tool for sorting out the lagging writing HDD and keeping the operation efficient. All the information you need will be shown on the screen of the PC.
|During the working process, the duplicator is able to monitor the status of duplication from a PC.
|Shows and records the brand name, model, S/N, duplication time, result of every HDD from all the ports, the info of both sources HDD and target HDD are recorded.
|Slow R/W speed HDD detection: lagging HDD can be easily sorted because the user can see the duplication speed of every port by “Event Log”.
|To select a period of time in order to export part of the log data. Just one click, the data will be exported into .txt file and saved on PC. The date of export is the file name. (e.g. 20130308.txt)
|Log Report Management
|Records operation time, each port’s process details, including HDD’s model, capacity, S/N, the result (pass, fail).
|Real-Time recording and viewing Log Report via PC-Link
|Log report .txt file can be generated via USB port and saved to USB device
|It can save up to 130,000 pieces of log. One instruction onto one HDD is recorded as one piece of log. (e.g. duplication from 1 HDD to 21 targets will be recorded to 21 pieces of the log)
|The auto power control system
|When the HDD duplicator stops executing any function, the machine will automatically cut off the power of each port to protect the HDD from damage during removal from the HDD duplicator. The power of each port will only be supplied when the operation is on.
|There are two modes of operation, stand-alone and PC-link operation. User can choose either mode to satisfy different needs. Stand-alone is excellent in simplifying operation and very user-friendly (operating on four buttons of duplicator would complete all the jobs)